Configuration: 3S1P (3 Series, 1 Parallel)

Cell Type: High Discharge Rate Lithium Polymer (LiPo)

Nominal Voltage: 11.1V

Charge Cut-off Voltage: 12.6V (4.2V/Cell)

Discharge Cut-off Voltage: 9.6V (3.2V/Cell)

Balance Connector: JST-XHR 2.54mm 4Pin

Rated Capacity: 1600mAh

Rated Energy: 17.76Wh

Continuous Discharge Rate: 150C

Continuous Discharge Current: 240A

Peak Discharge Current (Instantaneous): 300A ~ 360A (<3 seconds)

Internal Resistance: ≤ 6 ~ 8 mΩ

Recommended Charge Rate: 1C ~ 5C

Standard Charging Current: 1.6A ~ 8A

Max Recommended Charging Current: 8A (5C)

Charging Temperature: 0°C ~ 45°C

Dimensions (L × W × H): 120 × 40 × 30 mm

Weight: Approx. 230g

Output Connector: XT90‑S / EC5 / AS150

Environment and Lifespan

Discharging Temperature: -20°C ~ 60°C

Storage Temperature: -20°C ~ 25°C 

Storage Voltage: 3.80 ~ 3.85V per cell (11.4 ~ 11.55V for the pack)

Cycle Life: ≥ 150 cycles (remaining capacity ≥80%, under standard charge and discharge conditions)

Applicable Models: FPV Drones, Fixed-wing Aircraft, RC Cars/Boats, Small UAVs, High-Power Models, etc.