Configuration: 8S1P (8cells in series, 1 parallel)

Nominal Voltage: 29.6V

Charge Cut-off Voltage: 33.6V (4.2V/cell)

Discharge Cut-off Voltage: 25.6V (3.2V/cell)

Balance Connector: JST-XHR 2.54mm 9Pin

Rated Capacity: 10000mAh

Rated Energy: 296Wh

Discharge Rate (Continuous)：30C (300A) When using QS8 or AS150 connector (rated ≥300A)

Peak Discharge Current (Instantaneous): 360A (36C, <3 seconds)

Internal Resistance: Typical ≤5 mΩ, Max ≤8 mΩ (for the whole pack)

Recommended Charge Rate: 1C

Standard Charging Current: 10A (1C)

Max Recommended Charging Current: 44A (4.4C) Requires compatible balance charger ≥1100W & adequate cooling

Note: 4.4C fast charging is for advanced users; standard 1C is recommended.

Charging Temperature: 0°C ~ 45°C

Dimensions (L × W × H): 140 × 70 × 90 mm

Weight: Approx. 1.2kg

Output Connector (Standard): Dual EC5 in parallel (Configured in parallel; suitable for continuous currents up to 240A, and capable of handling 300A peak loads with proper soldering and adequate ventilation.)

Alternative / Note: For sustained 300A loads, a single QS8 or AS150 connector (rated ≥300A) is recommended for minimal resistance. (Available upon request or customization)

Discharging Temperature: -20°C ~ 60°C

Storage Temperature: -20°C ~ 25°C

Storage Voltage: 3.80 ~ 3.85V per cell (22.8 ~ 23.1V for the pack)

Cycle Life: ≥500 cycles (at 1C charge/1C discharge, 25°C, 100% DOD, remaining capacity ≥80%)

Applicable Models: FPV Drones, Fixed-wing Aircraft, RC Cars/Boats, Small UAVs, High-Power Models, etc.